You’ll need basic hand tools. Think about your goals and choose and hand bars to help you achieve your goals. Next, loosen the screw or bolt, hold your right and left handlebar-mounted switch. Remove these switches in bars and had hung on the line yet. Remove the clutch and brake perches to sit on both clamp brake master cylinder on the handlebar clamp, or another location, so it hangs off the bike. The choke is attached to the accelerator cable, it is necessary to solve the cable to remove the gas hose and remove the handlebar stem. Install the largest of the new two handles rising above the gas tube and the fixed handle with a safety rope.
Delete removes the old bar on the four screws on the top of the crown. Slide the new handle on the left handlebar and grip on the lifeline. Push the gas tube with a new handle on the right handlebar and replace the throttle cable. Install the switch housing and right to left and pull cover bolts / screws. Locker install the clutch and brake master cylinder and lever. Sits on the bike and find your preferred angle of the handlebars, clutch and brake lever. Whether you make your bike more fashionable, functional and fun, a new set of handlebars is the easiest way to make your bike more.